MD Helicopters Safer. Quiter. Smoother.

Service Bulletins for Model MD-500-600

Page Last Updated: 16 March 2009

Size 369D
SB369D-
or DN-
369E
SB369E-
or EN-
369F
SB369F-
or FN-
500N
SB500N-
or NN-
600N
SB600N-
Title Issue/
Reissue Date

121K

207

102

087

 

  INSPECTION OF SHORT EDGE MARGIN CONDITION ON 369D23500 TAILBOOM ASSEMBLY 20 JUL 2010

102K

206

101

086

043

  INSPECTION OF P/N 369D292028, AFT PASSENGER STEP 05 FEB 2010

145K

050R1 GOVERNOR ELECTRONIC CONTROL UNIT (ECU) REPLACEMENT 03 MAR 2010

102K

205R1

100R1

085R1

039R1

  Oil Cooler Belt, One Time Inspection 16 MAR 2009

75K

 

 

 

040R1

047R1 DE-ENERGIZE YSAS SYSTEM AND REPLACE YSAS ADAPTER
(Ref. AD-2008-22-52)
27 AUG 2008

91K

 

 

 

029R3

046R3 NOTAR FAN TENSION-TORSION (TT) STRAP REPLACEMENT 09 JUL 2008

99K

200

094

078

022

  Landing Gear Strut Inspection and Fairing Modification
(Ref. AD 2007-12-23) fr
07 APR 2000

99K

204

099

084

    Tail Rotor Blade Assembly, One Time Inspection.
(Ref. AD-2007-09-51) fr
26 APR 2007

123K

 

098

083

028 045 One Time Inspection of the Oil Cooler Blower, Drive Pulley installation 28 MAR 2007

77K

 

 

 

  044 Lateral Mixer Output Link Assembly, One Time Inspection (Ref. AD 2007-05-51) fr 16 FEB 2007

89K

 

 

 

  043 Tailboom Assembly Attach Fitting One Time Inspection, Attach Fitting and Nutplate Replacement
(Ref. AD 2008-20-05)
13 APR 2006

51K

203R1

 

097R1

 

082R1

 

    Tail Rotor Blade Abrasion Strip Tap Test and Modification 23 JAN 2006
76k       027 042 Forward and Center Thruster Control Cable Assemblies Connector One-Time Inspection (Ref. AD2004-20-08) 03 MAY 2004
82K       026 041

Tailboom Assembly Overlap Inspection and Rework

26 NOV 2003

50K         040 Control Support Bracket Assembly Life Reduction with YSAS Installed
(Alternative Method of Compliance - AMOC)

19 DEC 2003

80K         039 Tailboom Assembly Attach Fittings and Upper Longerons Inspection

09 DEC 2003

44K     081     Minimum N1 Starting Speed Decal /Placard Installation 22 JUL 2003
99K         038 Exhaust Duct Inspection 06 MAY 2003
102K 202 096 080 025 037 Main Transmission Bonding Jumper Inspection and Rework 14 AUG 2002
105K         036 Tailboom Assembly Attach Fitting One Time Inspection and Repair
(Ref. AD2006-08-12)
02 NOV 2001
104K       024 035 Fan Pitch Control Aft Tube Assembly One Time Inspection 23 OCT 2001
122K         034 Torque Transducer Electrical Connector One Time Inspection 13 DEC 2001
43K         033 Main Rotor Drive Shaft Life Reduction (Ref. AD2003-16-11) 13 DEC 2001
49K         032 Turbine Outlet Temperature (TOT) Indicator Replacement 13 DEC 2001
71K 201R2 095R2 079R2 023R2 031R2 Main Rotor Blade Assembly Torque Event Inspection (Ref. AD2005-21-02) 04 FEB 2004
96K        

030R1

Inspection of Vertical Stabilizer and Torque Tube and Replacement of Attaching Hardware

25 MAY 2001

119K        

029

Motive Flow Restrictor Removal

10 JAN 2001

99K 200 094 078 022   Landing Gear Strut Inspection and Fairing Modification 07 APR 2000
135K       021 028 Forward and Center Thruster Control Cables, Conduit Cap at Telescopic Swivel End, Inspection
(Ref. AD 99-25-08)
19 NOV 1999
187K       020R2 027R2 Forward and Center Thruster Control Cables, Conduit Cap Relief Area, Inspection
(Ref. AD 99-25-08 & Alternate Method Of Compliance - AMOC)
24 APR 2000
64K 199 093   019   Turbine Outlet Temperature (TOT) Wire Harness, One Time Inspection
(Ref. AD 2000-08-22)
11 JAN 2000
69K        

026

Turbine Outlet Temperature (TOT) Wire Harness, One Time Inspection
(Ref. AD 2000-08-22)

11 JAN 2000

53K         025 Fuel System Inspection 02 JUL 1999
          024R1 Link Assembly Replacement 06 APR 1999
57K         023R1 Cyclic Stick Replacement 30 JUL 1999
433K 198  092       Tail Rotor Fork Inspection, Four-Bladed

(Ref. AD 99-13-09)

10 MAY 1999
377K         021R1

Inspection/ Reidentification/ Serialization of Cyclic Control Stick Sockets and Left Hand Command (Co-Pilot) Cyclic Tube 

11 MAR 1999
121K         022 Torque Transducer Replacement 23 APR 1999
69K         020R2 Electromagnetic Compatibility Test (EMC) for Optional Equipment Effects on the FADEC Control 14 APR 2003
76K         019 FADEC Wire Harness Standoff Installation/ Inspection 23 APR 1999
224K         018R1 Torque Pressure Transducer (HIRF Protection) Modification 07 FEB 2000
72K         017 FADEC Manual Switch Guard Modification 06 OCT 1998
91K         016R1 Audio Warning System Replacement 18 SEP 2000
64K         015 Engine Fuel Control Box Bolt Replacement 23 APR 1999
43K 197 091   018   Engine Fuel Pressure Switch Replacement 23 FEB 1999
103K   090R1 077R1 017R1 014R1 Socket Contact Assembly Inspection
(Ref. AD 99-08-07)
25 SEP 1998
85K         013R1 Low Fuel Level Warning Light 15 APR 1999
44K 196 089 076 016 012 Oil Cooler Blower Bracket Replacement
(Ref. AD 99-20-12)
28 APR 1998
59K         011 Cyclic Controls Mixer Replacement (8 deg. phase change) 05 MAY 1998
105K         010 Landing Gear Fairing Modification 28 APR 1998
51K         009 Collective Controls Life Reductions and Serializations
(Ref. AD 99-17-18)
24 FEB 1998
45K         008 Generator Control Unit Replacement 19 FEB 1998
1146K 195R3 088R3 075R3 015R3 007R2 Main Rotor Blade Root End fitting Inspection (Ref. AD98-15-26) 13 JUL 1998
45K         006 Thruster Tip Cap Removal 08 DEC 1997
143K         005 Installation of Revised VNE Cards 04 MAR 1998
80K         004 Cabin Seat Restraint Replacement 12 FEB 1998
71K 193R1 086R1 073R1     T/R Blade, Leading Edge Inspection for Cracks 03 MAY 1999
49K 192 085 072 013 003 Input Shaft Coupling Assembly Inspection
(Ref. AD 99-04-12)
26 SEP 1997
46K 191 084 071 012 002 Improved Main Transmission Inspection 26 SEP 1997
72K         001 Engine Cooling Improvement 12 SEP 1997
74K 190 83 70 011   Overrunning Clutch Inspection 25 JUL 1997
50K 189 82 69 009   Main Rotor Transmission Component Inspection (369D25127-11) 10 JAN 1997
43K     68     Tail Rotor Control Rod Replacement 22 NOV 1996
1139K 188 81 67 008   Main Rotor Blade Root End Inspection (Ref. AD96-10-09) 27 OCT 1995
67K 187 80 66     Tail Rotor Blade Abrasion Strip Modification 26 OCT 1994
107K 186 79 65 007   Firewall Fuel Fitting Modification 26 SEP 1994
46K       006   Tailboom Decal Installation 10 APR 1994
78K       004   Y.S.A.S. Actuator Inspection and Replacement 28 MAY 1993
55K       003   Rate Gyro Inspection and Replacement 25 JAN 1993
59K 185 78 64     Tail Rotor Swashplate Lockwasher Inspection
(Ref. AD 94-24-04)
23 SEP 1994
72K 184 77 63 005   Four-Way Trim Switch Replacement 10 MAR 1994
53K   76       Fuel Pressure Switch Inspection/ Replacement 20 MAY 1992
79K 183.2 75.2 62.2     Main Rotor Blade Inspection/ Replacement 27 JAN 1993
146K 182 74 61     One-Time Inspection/ Rework of Engine Inlet Area 20 MAR 1992
85K 181.1 73.1 60.1     Inspection/ Rework of Fuel Vent System (Helicopters Equipped with 369H8108, 369H8108-501 or 369H8108-503 Fuel Vent Line Emergency Shut-Off Valve 10 SEP 1992
47K 180 72 59     Inspection of Overrunning Clutch Outer Race (369A5352 Overrunning Clutch Assembly) 17 JAN 1992
137K   71 58     One-Time Replacement of Diodes with Transzorbs 19 DEC 1991
95K 179 70 57     One-Time Addition of Rivets to Tail Rotor Abrasion Strip 27 SEP 1991
76K 178 69 56     One-Time Rework of Main Transmission Oil Cooling Fan Mounting Bracket 01 FEB 1991
100K 177.1 68.1 55.1     Pre-flight Check and One-time Inspection of Tail Rotor Blades 01 MAR 1991
53K 176 67 54     One-Time Reinstallation of the 369A1602-3 Tail Rotor Fork Bolt 21 NOV 1990
53K 175 66       One-Time Inspection of 369H8407 Engine Bleed Air Tube Flexible Area 21 NOV 1990
52K 174 65 53     Inspection of 369D25434 Tail Rotor Input Gearshaft in the Tail Rotor Gearbox 21 NOV 1990

73K

173R1

64R1

52R1

0042

051 Inspection of Lead-Lag Link Attach Nuts 06 JUL 2009
65K 172.1 63.1 51.1     One-Time Installation of 369D24054-3 Warning Decals in the Engine Compartment Area 04 SEP 1990
69K 171.1 62.1 50.1     One-Time Inspection of 369D25623 Oil Cooler Blower Belt 21 NOV 1990
50K 170.1 61.1 49.1     One-Time Torque Check and Inspection of Main Rotor Blades 15 MAY 1991
74K 169 60 48     One-Time Replacement of Tail Rotor Blade Pitch Arm Bolt Attaching Nuts 15 JUN 1990
73K 168 59 47     One-Time Replacement of 369A9817 Polycarbonate Cover Assemblies 15 JUN 1990
112K 167 58 46     One-Time Check/Periodic Inspection/ Replacement of Tail Rotor Swashplate Bearing Set 14 MAR 1990
191K 166.1 57.1 45.1     One-Time Inspection and Replacement of Air Industries MS21250-04036 Bolts and Verification of Proper Installation of All MS21250-04036 Bolts in Main Transmission 14 MAR 1990
53K 165 55 43     Installation of Oil Flow Restricting Devices into the Engine Oil and Torque Pressure Sensing Systems 27 OCT 1989
57K 164.1 54.1 44.1     Conversion to 369A5350-41 Overrunning Clutch Sub-Assemblies 04 MAY 1990
69K 163 53 41     One-Time Inspection of 369A5358 Lockwasher in the Overrunning Clutch Assembly and Inspection of Engine Output Drive Splines 27 OCT 1989
48K 162 52 40     One-Time Inspection of Emergency and Utility Float Skid Tube Extension Assemblies 30 JUN 1989
101K     39     One-Time Rework of 250-C30 Lower Aft Engine Mount Installation 20 JUN 1989
84K 161 51 38     One-Time Inspection of 369D25420 Tail Rotor Transmission Output Shaft Duplex Bearings 10 JUL 1989
74K 160 50       One-Time Inspection of Four-Bladed Tail Rotor Hub Assembly 19 JUN 1989
49K 159 49 37     One-Time Inspection of 369A8352, 369H8306, 369H8025, 369H8024-5 AND 369D28651 Aeroquip Hoses 12 JUN 1989
122K 158.1 48.1 36.1     One-Time Inspection and Rework of 369A7007, 369A7009, 369A7011 and 369A7012 Main and Tail Rotor Control Tubes 21 JUL 1989
44K 157 47 35     One-Time Inspection of 369H5660 Engine-to-Transmission Driveshaft Couplings 05 APR 1989
62K 156.2 46.2 34.2 010   Inspection of 369A5352 Outer Race of Overrunning Clutch Assembly 369A5350 11 APR 1997
64K 155 45       Main Rotor Blade Upper and Lower Trailing Edge Weight Rework 15 JAN 1988
153K 154 44 33     Main Rotor Hub Strap Pack Lamination Inspection and Tri-Flow Wash Procedure 15 JAN 1988
81K 153.2 43.2 32.2     Inspection and Replacement of 369A1602 Tail Rotor Fork Bolt 21 APR 1989
72K 152 41 30     Replacement of 369A8442-Basic Latch Assembly on the Particle Separator Door 18 DEC 1987
78K   40.1 29.1     Rework of 421-087 Horizontal Stabilizer Assembly 07 APR 1989
59K 151 39 28     Inspection of Tail Rotor Transmission Mounting Studs 10 OCT 1987
96K 150 38 27     Start Pump Wire Routing and Fuel Quantity Sender Inspection 15 SEP 1987
76K 149 37 26     369A8010 Engine Oil Pressure and Torque Tube Pull Test 15 SEP 1987
597K 148.1 36.1 25.1     Inspection of 369D25132-BSC or -5 Main Transmission Output Shaft Assembly Ring Gear Carrier 30 OCT 1987
85K 147.1 35.1 24.1     One-Time Inspection of 369D25125-BSC, and -11 Main Transmission Tail Rotor Output Drive Pinion Shaft 30 OCT 1987
52K 146.1 34.1 23.1 002   Daily Pre-Flight Examination of Main Rotor Blade Leading Edge Abrasion Strip Bonding 10 SEP 1992
67K       001   Rework Of Static Ports 26 AUG 1992
141K 145 33 22     Fabrication and Installation of 369D25704 Oil Flexline Hose Assemblies in the Main Transmission Oil Cooling Installation 09 APR 1987
30K 144 32 21     Tail Rotor Elastomeric Bearing Shimming Procedure (Cancelled)  CANC
ELLED
22 FEB 2000
122K 143.1 31.1       Installation/ Inspection of Tail Rotor Driveshaft Aft Failsafe Device 28 NOV 1986
233K 142 30 19     Inspection/ Rework of United Instruments Inc. Altimeter 20 MAY 1986
124K 141 29 18     EON Seat Belt Removal 15 MAY 1986
122K 139.1 27.1 15.1     Inspection of 369D25620, 369D25622, 369D25622-3 and 369D25624 Cooling Fan Pulleys 18 MAR 1986
503K 138 26 14     Inspection and Rework of A1066-1082 (Fargo) Auxiliary Fuel Tank 10 JAN 1986
63K 137 25 13     Inspection of 369D27514 and 369D27515 Tail Rotor Bellcrank 20 DEC 1985
85K 136 24 12     Main Rotor Transmission Cooling Installation Bracket Replacement 07 AUG 1985
246K 135         Exit Warning Decal (Includes AC91-32 Safety In and Around Helicopters) 07 AUG 1985
40K 134 23 11     Non-Airworthy Clutch Assemblies 18 MAR 1985
60K 133 22 10     Unauthorized Helicopter and Spares Distribution 18 MAR 1985
79K 132.1 21.1 9.1     Riveting Tail Rotor Tip Cap-to-Blade 01 MAY 1985
529K 131.1 20.1 8.1     Corrosion Removal - Main Rotor Drive Shaft ID 30 OCT 1987
578K 130.2 19.2 17.1     One-Time Inspection of Tail Rotor Blade Leading Edge Abrasion Strip Bonding; Pilot Preflight Check of Tail Rotor Blade Leading Edge Abrasion Strip 23 MAR 1987
66K 129 18       Riveting Tip Cap-to-Tail Rotor Blade 27 AUG 1984
61K   16 6     Alteration of Crew Compartment Seat Back Assemblies 13 JUN 1984
54K 127 15       Removal of Gray Coating from 369D21700 and 369D21700-3 Tail Rotor Hubs 12 JUN 1984
93K 126 14       Pull Test of 369A8137-503 and -603 Fuel Shut-Off Valve Control Cable 10 APR 1984
93K   13.1       Inspection of 3697011 Longitudinal Mixer Control Rod; Replacement of 369D22509-51 Doubler with 369DSK169-3 Repair Doubler 01 JUN 1984
37K     5     Disarming N2 Electronic Overspeed Control System 09 DEC 1983
81K     4     Periodic Inspection of 369D25510 Main Rotor Drive Shaft 29 JUL 1983
309K     3     Inspection of Overrunning Clutch Sprag Assembly 29 JUL 1983
87K

12       Inspection and Possible Replacement of 369A7003-3 Main Rotor Swashplate Bearing 23 DEC 1983
87K 125

      Inspection and Possible Replacement of 369A7003-3 Main Rotor Swashplate Bearing 23 DEC 1983
120K

10       Inspection of 369D25709 and 369D25710 Main Transmission Oil Line; Replacement of 369D25709 and 369D25710 Main Transmission Oil Line and Brackets with New 369D25709-11 and 369D25710-11 Lines and Brackets 10 NOV 1983
120K 124         Inspection of 369D25709 and 369D25710 Main Transmission Oil Line; Replacement of 369D25709 and 369D25710 Main Transmission Oil Line and Brackets with New 369D25709-11 and 369D25710-11 Lines and Brackets 10 NOV 1983
44K 123         Battery Case and Main DC Power Wiring Inspection 28 OCT 1983
51K

9       Inspection and Overhaul of 369A8104-5 Fuel Shutoff Valve 29 JUL 1983
51K 122

      Inspection and Overhaul of 369A8104-5 Fuel Shutoff Valve 29 JUL 1983
45K 121         Button Plug Installation - Mast Support Structure Aft Channel 27 JUN 1983
73K

11       Installation of Collective Stick Support Bracket Reinforcement Strap 23 NOV 1983
74K 119.1         Installation of Collective Stick Support Bracket Reinforcement Strap 23 NOV 1983
43K 118         Inspection of 369A8131-19 Fuel Vent System Hose 02 MAY 1983
43K

7       Inspection of 369A8131-19 Fuel Vent System Hose 02 MAY 1983
84K 117         Installation of 510 ohm Resistor in 369D296303, 369D296303-701 and 369A4245 Fuel Quantity Sending Units 20 MAR 1983
41K

5       Pilot’s Compartment, Center Passenger Seat Lap Belt Installation Check; Preflight Check of Passenger Lap Belt and Shoulder Strap Adjustment 15 FEB 1983
42K 115         Pilot’s Compartment, Center Passenger Seat Lap Belt Installation Check; Preflight Check of Passenger Lap Belt and Shoulder Strap Adjustment 15 FEB 1983
84K   4       Periodic Inspection of 369D25510 Main Rotor Drive Shaft 29 APR 1983
308K   3       Inspection of Overrunning Clutch Sprag Assembly 29 APR 1983
61K 114         Main Rotor Transmission Drain Line Brackets Modification 15 FEB 1983
141K 113         Relocation of 369A8448 Engine Air Inlet Filter Bypass Door Aft Pulley, 369A8447 Bracket and 369H90152-3 or 369D290125-11 Particle Separator Filter Gasket Inspection 10 JAN 1983
72K 112         Inspection of Landing Gear Struts and Feet 19 NOV 1982
76K 111         New Shimming Procedure for 369A5501 or 369H92564 Tail Rotor Drive Shaft Forward Flexible Coupling with Failsafe Device Installed 27 SEP 1982
113K 110.1 56 42     Inspection and Repair of 369D292028 Passenger Step Assembly, Aft Extended Landing Gear Foot Assembly 27 OCT 1989
58K 108         Replacement of Intercom (ICS) Switch and Jack Assembly 01 JUL 1982
170K 107         Installation of Fuselage Attach Points (369H90070-211, 212 Subassemblies) for Accessory Kit Attach Fittings 01 JUL 1982
79K 104         Instrument Cluster 3-Pack Conversion - AC to Rochester 05 MAR 1982
71K 102         Inspection of 369A7006-5 Tail Rotor Control Rod; Rework of 369D290128-11 Particle Separator Fairing Assembly and 369D290128-31 Cover Assembly 01 FEB 1982
73K 99         Periodic Inspection of 369D25510 Main Rotor Drive Shaft 30 NOV 1981
67K 97         Installation of 369D292585 Master Cylinder Stop on 369H90123 Series Main Rotor Brake System 05 OCT 1981
45K 96         One-Time Inspection of Attachment Hardware for Sta-Strap Securing Electric Wiring to Boom Fairing at Sta 138.50 21 AUG 1981
75K 95         Installation of Fail Safe Device at 369A5501 or 369H92564 Tail Rotor Drive Shaft Forward Flexible Coupling; Periodic Check of Flexible Couplings 07 AUG 1981
44K 94         Deactivation of Main Rotor Brake System (if installed); Periodic Inspection of 369A5501 or 369H92564 Tail Rotor Drive Shaft Forward Flexible Coupling 25 JUN 1981
304K 93         Inspection/ Modification of BL-16600-12 Breeze Corporation Inc. Hoist 18 JUN 1981
83K 92         Corrosion Inspection/ Treatment of 369A7314 and 369N2648 One-Way Lock Support Assembly 04 JUN 1981
106K 91.1         Inspection of Main Rotor Hub Strap Pack Retention Bolts and Replacement of Bushings 22 JUL 1981
58K 88         Elimination of Possible Interference of Safety Wire with Oil Cooler Blower Drive Belt 19 MAR 1981
70K 87         Replacement of 369A7706-3 RPM Governor Lever Control Rod 15 MAY 1981
72K 86         Shimming Procedure for Gas Producer Interconnecting Torque Tube Assembly 06 MAY 1981
120K 82         Field Inspection and Repair of 369D25301 and 369D25401-3 Tail Rotor Gearbox Main Housing Assembly 15 APR 1981
132K 81.1         Inspection of Overrunning Clutch Sprag Assembly 10 MAY 1983
155K 80         Replacement of TAVCO 23111369 Solenoid Valve, Float Inflation System - Hughes 369D290121-501 and -505 Emergency Float Assemblies 20 MAR 1981
64K 79         Sealing of Interface of Abrasion Strip and Main Rotor Blade Skin 30 JAN 1981
71K 78.1         Inspection of 369A7003-3 Swashplate Bearing 28 JUL 1981
124K 73         Periodic Inspection and Bonding Procedure for 369A1724 Tail Rotor Drive Fork Elastomeric Teeter Bearing 22 AUG 1980
54K 71         Wiring Modification - Utility Light Circuit and Transmission Oil Pressure and Temperature Warning Light Circuit 30 SEP 1980
117K 70         Identification and Possible Rework of Seat Belt and Shoulder Harness Assemblies 11 JUL 1980
96K 69         Polarity Check of Diode Assemblies 30 JUN 1980
75K 68.1         Relocation of Tail Rotor Bungee Spring Forward Attachment; Tail Rotor Force Adjustment 08 DEC 1980
192K 66         Rework of 369D290125-21 Mist Eliminator Assembly - 369H90148-507 and -509 Engine Air Inlet Filter (Particle Separator) Assembly 11 MAY 1980
77K 65.1         Rework of Cooling Blower Mounting Bracket 19 DEC 1980
88K 63         Horizontal Stabilizer Assembly - Adding Drain Holes and Sealing Doubler Edges 03 MAR 1980
43K 62         Inspection and Rework of 369D25401 Tail Rotor Transmission Housing Assembly 03 MAR 1980
71K 60         Installation of Filter Gasket - 369H90148-503, -505 and -507 Engine Air Inlet (Particle Separator) Filter Kit 03 MAR 1980
80K 58.2         Inspection and Repair of Aft Fuselage Skin Cracks; Installation of Doublers on Boom Fairing Longerons 11 MAY 1981
65K 54.1         Inspection of Collective Torque Tube Support Bracket (369A7304 Magnesium, 369N2608 Aluminum) and Collective Bungee Support Bracket (369A7339 Magnesium, 369N2650 Aluminum) 07 MAR 1980
152K 52.2         Kit Installation of 369D290140 Auxiliary Fairings and Seals, Engine Air Filter (Particle Separator) 15 JAN 1980
107K 51.8 42.6 31.6     Inspection of Main Rotor Blade Root Fitting Assemblies; Inspection of Main Rotor Hub Lead-Lag Link Assemblies (Ref. AD95-03-13) against earlier SB dates 03 JAN 2000
97K 49         Inspection and Repair of 369A3035-11 and 369A3035-15 Sta 142 Tail Rotor Control Bellcrank Supports 11 JUN 1979
82K 47         Field Rigging Check of 369A8013-503 Heater Control Valve Assembly 16 APR 1979
90K 45.2         Internal Modification and Re-identification of 369D21400-501 Main Rotor Lead-Lag Elastomeric Damper Assembly 22 OCT 1979
143K 44.1         369D23601 Horizontal Stabilizer Assembly - Adjustment or Replacement of 369D23678-3 Trailing Edge Tabs; Relocation of 369H6610-5 Static Pressure Tube 22 JUN 1979
74K 42         369H7825 Droop Control Bellcrank Assembly (Sta 68.0) - Relocation of Locknut and Installation of Spacer 15 FEB 1979
66K 37         369D21800 Tail Rotor Pitch Control Assembly - Seating of Dual Bearings Inner Races; Torque Increase for 369D21803-3 Locknut 01 DEC 1978
43K 34         Replacement of 369D28309 Hose Assembly - Engine Oil Cooler to Engine Oil Tank 17 OCT 1978
41K 31         Installation of 369D21012 Rubber Washers; Attachment of Pitch Control Rods to Main Rotor Swashplate Assembly 08 SEP 1978
67K 27.1         Inspection and Rework of 369A1725 and 369A1725-501 Tail Rotor Hub 08 DEC 1978
46K 26         Inspection and Possible Replacement of 369H6541-5 and -21 Seat Belt Assemblies 15 JUL 1978
71K 25.1         Rework of Fuselage Structure, Forward Section 07 MAR 1980
82K 23.2         Installation of Standoff Clamps - Heating System Hose and Main Transmission Oil Cooling Lines. 05 SEP 1979
61K 22         Sealing of 369D23600 and 369D23600-501 Vertical Stabilizer Assembly 26 JUN 1978
63K 21         Rework of 369D26100-101 Standard Landing Gear Skid Assembly; Rework of 369D292114-101 Extended Landing Gear Skid Assembly 06 JUN 1978
45K 19         369H92537 Engine Compressor Water Wash Kit Installation - Inspection and Replacement of Rivets 14 APR 1978
67K 14         Modification Kit - 369D25167 Main Transmission Lubrication Pump 15 DEC 1977
44K 13         Inspection of 369H90085 Litter Door Installation 30 NOV 1977
43K 11         Modification of 369A4516-N1 Tach Indicator 03 OCT 1977
91K 9.2         369A5350-603 Overrunning Clutch Assembly - Inspection of 369A5350-11 Clutch Subassembly 369A5361 Ball Bearing and 369A5368 Seal 27 OCT 1978
55K 8         Installation of 369D21808 Support Ring; 369D21806 Tail Rotor Stationary Boot 30 AUG 1977
48K 6         Main Rotor Pitch Control Rod Assembly - Replacement of 369A1009-3 Pitch Rod and Inspection of Rod End Bearings 30 AUG 1977
325K 3         Main Rotor Controls - Rigging of Cyclic and Collective Controls; Rework of Mixer Controls; Installation of Pitch Housing Striker Plate Support Nut 30 AUG 1977
43K 1         Inspection of Tail Rotor Output Shaft; Installation of Protective Dust Boot 23 MAR 1977
MD Explorer MD 600N MD 520N MD 530F MD 500E